Recommended Installation Steps
This guide walks you through the recommended method for installing your Hero Cover to ensure proper fit, alignment, and coverage. Following these steps will make installation quick and consistent across different vehicle types and features.
Step-by-Step Installation
1. Position the Cover on the Vehicle
Place the cover loosely over the vehicle, ensuring the front and rear are oriented correctly. Do not pull the cover tight at this stage.
2. Insert the Mirror Pockets First
Locate the mirror pockets and insert both side mirrors into their respective pockets.
This step is key—it centers and aligns the cover correctly on the vehicle.
3. Pull the Cover Down Over the Sides
With the mirrors secured, gently pull the cover down along both sides of the vehicle. Allow the fabric to fall naturally into place.
4. Secure the Front and Rear Sections
Adjust the cover over the front and rear bumpers to ensure full coverage and a smooth, even fit.
5. Antenna Pocket Installation (If Applicable)
If your cover includes an antenna pocket:
Insert the mirror pockets first
Align the antenna opening over the antenna
6. Final Fit Check
Smooth out the fabric and confirm the cover is evenly positioned around the entire vehicle.
Helpful Tip
Using the mirror-first installation method ensures faster installation, better alignment, and consistent results—especially on vehicles with custom features.