Keep your vehicle protected and looking sharp—fast! Follow these steps for a smooth installation.
1. Verify & Prepare
✅ Check fit: Make sure the cover matches your vehicle (see label).
🚗 Wash & wax: Clean your vehicle thoroughly to avoid scratches. Use a quality wax suitable for your paint.
2. Ideal Installation Conditions
🌡️ Temperature: Install in 70ºF / 21ºC or higher.
🏠 Cooler climate? Use a warm garage to make the vinyl flexible for a tight fit.
3. Install the Cover
Stretch the LeBra over the front end or hood.
Ensure it fits snugly—cover should be tight at all times.
4. Important Care Tips
❌ Do not use vinyl protectants – they clog breathable perforations.
💨 Remove if wet or parked – moisture trapped under the cover can damage paint.
🧹 Clean regularly: Every 2 weeks, check for dirt/dust underneath.
⚠️ High winds: If flapping occurs, stop and retighten or remove.
5. Cleaning Your LeBra
🧼 Mild soap + warm water + soft brush.
💦 Rinse thoroughly and allow to dry completely before reinstalling.
❌ Do not use washing machines or dryers.
6. Need Assistance?
Contact Customer Support, you can submit a request through our Help Center or call us at 1-800-274-7006 for immediate assistance.